Home Nostalgia Gasser Packages Street Rod Packages Race Bodies Replacement Parts & Body Packages Grilles and Shells

Contact ScottRods

(419) 499-2705

Home Click
Here


Home | Contact ScottRods | Policies | Find us on Facebook


Copyright 2016 ScottRods LLC. Site construction StatusMark

All graphics, design, and illustrations within this website may not be reproduced in part or in whole without expressed written permission. All rights reserved.


1941 WILLYS PICK UP FOR S-10 CHASSIS

ScottRod's Hand Laid Fiberglass 1941 Willys Pick Up Cab

with Gloss Black Gel Coat Exterior Finish

ADDITIONAL OPTIONS AVAILABLE:


COMPLETE UNASSEMBLED BODY PACKAGE

*FOR ASSEMBLY BY THE EXPERIENCED BUILDER

$ 5,000 Base Price includes the following:


S-10 CHASSIS REQUIREMENTS FOR '41 WILLYS PICK UP


You can use any year S-10 or S-15 chassis from 1983 to 2003. The ideal chassis for the '41 Willys Coupe is the 108" chassis which is the standard cab short bed.  To use the longer chassis S-10 (117" Or 123") for the coupe you have to shorten the chassis in the middle to get to 108".  Then do either a four link or a ladder bar rear suspension to get to the 102" wheelbase required for the coupe.  Otherwise the rear kick up of the rails will be in the coupe floor. You can also back half the chassis for a pro street but will still have to start with the 108" wheelbase.  For the '41 Extended Pick Up you can use any wheelbase but you will have to adjust the length of the bed to accommodate the longer truck. The S-10 radiator is about 40" wide and will not work in this application.  We typically use a Griffin Radiator that is 19" wide due to the narrowness of the space between the fenders in the front.  Other modifications will include a new set of motor mounts that will move the engine about 9" back to where the damper pulley is over the cross member.  This is true for the V-6 and V-8 applications.  Instructions will be supplied with the purchase of a ScottRods Willys Body Package.  Please specify when ordering if your Willys body will be mounted on an S-10 Chassis.

1941 WILLYS PICK UP REPLACEMENT PARTS

COMPLETE ASSEMBLED BODY PACKAGE

$ 9,000 Base Price includes the following:



*CALL FOR A QUOTE ON OPTIONS

1937-41 Willys One Piece Tilt Front End with Molded Hood

1937-41 Willys Four Piece Front End w/Cowl Molding

1940 Willys Front Fender-Left (Will fit 1937-1942 Cowl)

1940 Willys Front Fender-Right (Will fit 1937-1942 Cowl)

1937-42 Willys Front Fender Inner Splash Panels-Left (Engine Guard)

1937-42 Willys Front Fender Inner Splash Panels-Right (Engine Guard)

1937-42 Willys Pick Up Stock Rear Fender-Left

1937-42 Willys Pick Up Stock Rear Fender-Right

Custom '40 Ford PU Rear Fender-L(widened-not a stock replacement)

Custom '40 Ford PU Rear Fender-R(widened-not a stock replacement)

1937-42 Willys Stock Style Flat Panel Dash (40-1/2 x 6 x 10)

1937-42 Willys 3-Panel Dash (40-1/2 x 8-1/2 x 10)

1937-42 Willys 3-Panel Dash w/Windshield Garnish (40-1/2 x 7x 23-1/2)

1940 Willys Hood

1937-42 Willys Door-Unassembled Inner & Outer Panels-Left

1937-42 Willys Door-Unassembled Inner & Outer Panels-Right

Custom Door for Ext Pick Up Cab-Unassembled Inner & Outer Panels-L

Custom Door for Ext Pick Up Cab-Unassembled Inner & Outer Panels-R

1941 Willys Headlight Rings

1941 Willys Center Grill Panel-Filled


SR-3725

SR-3726

SR-3703

SR-3704

SR-3721

SR-3722

SR-3708PU

SR-3709PU

SR-3708W

SR-3709W

SR-3712

SR-3713

SR-3714

SR-3704

SR-3715

SR-3716

SR-3716E

SR-3716E

SR-3705

SR-3702



$1,100.00

$1,300.00

$325.00

$325.00

$125.00

$125.00  

$200.00

$200.00

$300.00

$300.00

$150.00

$150.00

$150.00

$325.00

$450.00

$450.00

$500.00

$500.00

$50.00

$200.00